Cement Slurry Waterproofing:

Waterproof Cement Render/ Mortar is polymer modified, and is a specifically designed cementitious mortar/plaster, high strength wall render/repair coating. It is weather resistant, and incorporates shrinkage compensating (non-shrink) and adhesive components. It gives a water-tight render/repair with excellent long-term service and is also ideal for pointing.

Waterproof Render is factory made to BS EN ISO 9001:2000 and is mixed with water. It contains no toxic or harmful chemicals. It is a fully blended, cement-based system.

Uses:
  • General-purpose mortar with good plastic properties for pointing, repair work or rendering.
  • To provide a weather proof, highly durable render for all building and construction work.
  • To render houses, commercial and industrial buildings, particularly where waterproofing and high impact resistance is required.
  • .

    .

    CEMENT SLURRY WATERPROOFING
    - Cementitious tanking slurry is unique.
    It can be used below ground where water pressure is encountered.
  • .

    .

    3D DRAWING
    Section Through Capping Beam
  • .

    .

    CBP Tanking Slurry
    -When mixed with water and SBR Bonding Agent it can be applied to a masonry substrate.
  • .

    .

    3D DRAWING
    -Section through Capping Beam
  • .

    .

  • To protect buildings against adverse weather conditions, freeze thaw cycles and driving rain and winter road sprays.
  • To produce an aesthetically pleasing, even-textured coat to brick or block-work surfaces.
  • Cement render Systems:

    Cementitious tanking slurry is unique. It can be used below ground where water pressure is encountered within building structures such as cellars, bunds and other below ground areas. CBP Tanking Slurry is a premixed formulation of plastic modified hydraulically setting powder. When mixed with water and SBR Bonding Agent it can be applied to a masonry substrate to form a monolithic bond, blocking the passage of water as well as becoming an integral part of the structure. SBR Bonding Agent should be used as a primer between coats and diluted 3:1 in the gauging water.

    This will create a structural waterproofing system commonly referred to as tanking within the industry. In certain circumstances we recommend the use of Salt Neutralisers where there is evidence of Salt infestation in the area to be tanked. Fillet Seal and Rapid Setting Plug are also available for pressure areas where the wall meets the floor and where there is running or weeping water.

    Get in touch!

    Ready to start a project or require more information about us?
    Call us about your project or problem and we will be happy to help.


    Call us today on:

    0845 658 7777
    Or email us here